Conversation

Notices

1. Clarissa Walker (amisapphire@cwcyrix.nsupdate.info)'s status on Thursday, 06-Jul-2023 12:50:22 EDT Clarissa Walker
   I *may* have wrangled the power delivery issue. This may be solved, but I do not want to be too optimistic.
   
   USB 3.0 controller:
   Renesas Electronics (formerly NEC) µPD720200 /µPD720200A /µPD720201/µPD720202
   
   Detected as:
   - PCI\VEN_1033&DEV_0194&REV_03
   - PCI\VEN_1033&DEV_0194&REV_04
   - NUSB3\ROOT_HUB30
   - NUSB3\CLASS_09&SUBCLASS_00&PROT_00
   - NUSB3\CLASS_09&SUBCLASS_00&PROT_01
   - NUSB3\CLASS_09&SUBCLASS_00&PROT_02
   - NUSB3\CLASS_09&SUBCLASS_00&PROT_03
   - NUSB3\CLASS_09&SUBCLASS_01
   
   Instructions
   1. Locate the drivers for the controller, which are 2.1.39.0, and install them.
   2. After installation, run the USB 3.0 Host Controller utility.
   3. Check Disable USB 3.0 power management functions and click OK.
   
   Drivers:
   https://www.usb3-drivers.com/download.php?iddrv=62
   • Clarissa Walker (amisapphire@cwcyrix.nsupdate.info)'s status on Thursday, 06-Jul-2023 14:50:26 EDT Clarissa Walker

     in reply to
     Addendum:
     
     4. Reboot.
     
     I found out that without the reboot, unplugging and replugging the USB 3.0 device actually times out if it is done in less than 30 seconds.