Compaq KAP Fortran/OpenMP
for Tru64 UNIX

Order Number: AA--QMB4G--TE

This document contains instructions for installing Compaq KAP Fortran/OpenMP on Compaq Tru64 UNIX systems.

Revision/Update Information: This is a revised document.

Operating System and Version: Compaq Tru64 UNIX Versions 4.0F, 5.0, and 5.0A

Software Version: Version 4.3
Compaq Fortran Version 5.3

Compaq Computer Corporation
Houston, Texas

© 1995 Compaq Computer Corporation

© 1995 Kuck & Associates, Inc.

Compaq, the Compaq logo, Compaq C, and Compaq Fortran, Registered in U.S. Patent and Trademark Office.

KAP is a trademark of Kuck & Associates, Inc.

UNIX is a registered trademark of The Open Group.

All other product names mentioned herein may be trademarks or registered trademarks of their respective companies.

Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice.

Contents

This manual describes how to install Compaq KAP Fortran/OpenMP on processors running the Compaq Tru64 UNIX operating system.

For information about the compatibility of other software products with this version of KAP, refer to the Software Product Description (SPD). You can use the SPD to verify which versions of your operating system are compatible with this version of KAP.

Intended Audience

This manual is intended for a system manager who installs Compaq KAP Fortran/OpenMP on a Tru64 UNIX system.

Structure of This Document

This manual includes three chapters and two appendixes:

• Chapter 1 describes the operating system and hardware requirements for a Compaq KAP Fortran/OpenMP installation and related procedures that you complete before installing KAP.
• Chapter 2 describes the Compaq KAP Fortran/OpenMP installation procedure.
• Chapter 3 describes the Installation Verification Procedure (IVP) and any postinstallation procedures that you must complete before you use KAP.
• Appendix A describes the hierarchy and contents of KAP directories.
• Appendix B contains a log for a KAP installation.

Associated Documents

Please read the cover letter and release notes before installing the software, in case important information missing from this document has been added to these documents.

The documentation for Compaq KAP Fortran/OpenMP also includes the following:

• Compaq KAP Fortran/OpenMP for Tru64 UNIX User Guide
• Compaq KAP Fortran/OpenMP for Tru64 UNIX Quick Reference

For general information about installing software, refer to your Tru64 UNIX installation guide.

Conventions

The following conventions are used in this guide:

Convention	Description
UPPERCASE and lowercase	The Tru64 UNIX system differentiates between lowercase and uppercase characters. Literal strings that appear in text, examples, syntax descriptions, and function descriptions must be typed exactly as shown.
user input	This bold typeface is used in interactive examples to indicate typed user input.
#	A number sign is the default superuser prompt.

This chapter describes the preparations and requirements for installing Compaq KAP Fortran/OpenMP on Tru64 UNIX systems.

Your bill of materials (BOM) and indented bills report (BIL) specify the contents of your kit. If your kit is damaged or if you find that parts of it are missing, contact your Compaq representative.

Before starting the installation procedure described in Chapter 2, complete the preparations outlined in this chapter. You need to know about installation options and information related to the installation procedure.

1.1 Registering the License

The Compaq KAP Fortran/OpenMP software supports the Tru64 UNIX License Management Facility (LMF). A License Product Authorization Key (License PAK) must be registered in the License Database (LDB) to use Compaq KAP Fortran/OpenMP. The License PAK may be shipped along with the kit if you ordered the license and media together; otherwise, it is shipped separately to a location based on your license order.

To register a license under Tru64 UNIX, first log in as superuser. You can then perform the PAK registration in either of these two ways:

• If you have the license PAK on paper, enter the following commands at the superuser prompt:

  # /usr/sbin/lmf register

  • This register command brings you into edit (vi) mode.
  • Using regular vi edit commands, enter all the information on your License PAK. If you are not familiar with vi, please see the vi reference page (> man vi).
  • Exit the vi editor.

  # /usr/sbin/lmf reset

  • This reset command copies the license information from the LDB to the dynamic kernel LMF database.

  # exit

• If you have the license PAK in the form of a csh command script (in PAK_file), enter the following commands at the superuser prompt:

  # /usr/sbin/lmf register - < PAK_file # /usr/sbin/lmf load users # exit

Compaq KAP Fortran/OpenMP accepts licenses associated with the following lmf names:

• KAP-FORTRAN Capacity
• KAP-FORTRAN-USER Concurrent Use
• KAP-F90 Capacity
• KAP-F90-USER Concurrent Use

For complete information about using the Tru64 UNIX LMF, see Compaq Tru64 UNIX Software License Management (Tru64 UNIX, and DIGITAL UNIX Version 4.0 and above) or the lmf(8) reference page.

1.2 Checking the Media Software Distribution Kit

The kit includes a CD-ROM optical disk.

1.3 Understanding Installation Procedure Requirements

The following sections describe various requirements for installing Compaq KAP Fortran/OpenMP. Installing Compaq KAP Fortran/OpenMP and Compaq KAP Fortran/OpenMP reference pages, and running the Installation Verification Procedure (IVP) on a standalone system takes about 2 minutes.

1.3.1 Login Privileges

You must be able to log in as superuser on the system where you are installing Compaq KAP Fortran/OpenMP. Only when you are logged in as superuser do you have sufficient privileges to install the Compaq KAP Fortran/OpenMP software.

1.3.2 Hardware Requirements

For a complete list of supported processors, see the SPD.

Installing Compaq KAP Fortran/OpenMP requires at least 9.0 megabytes of disk storage space on your system.

To perform the installation, you need the following hardware:

• Software distribution device (if installing from media)
  A CD-ROM software kit.
  The documentation for the CD-ROM drive that you are using explains how to load media.
• Terminal
  You can use either a hardcopy or video terminal to communicate with the operating system and respond to prompts from the installation procedure for Compaq KAP Fortran/OpenMP.

You must install the following software before you install Compaq KAP Fortran/OpenMP, Version 4.2, for Tru64 UNIX Versions 4.0F and 5.0, and DIGITAL UNIX Versions 4.0D and 4.0E:

• Tru64 UNIX Alpha Base System
  The required subset is OSFBASExxx, which is named "Base System."
• Compaq Fortran, Version 5.3
  The required subset is DFABASE530.
• Compaq Fortran Run-Time Library
  The required subset is DFARTL385.
• OSFMANOPxxx
  This subset is named "On Line Manual Pages."
• OSFDCMTxxx
  This subset is named "Document Preparation Software."

When you have installed the previous software, you can then install the Compaq KAP Fortran/OpenMP software, which consists of the KF9BASE430 subset.

The SPD contains a complete list of prerequisite software and required version numbers.

1.3.3.1 Parallel Libraries

The installation kit includes KAI's parallel runtime library, libkmp_osfp10.a. Use the what command to determine the version of the parallel library:

• For libkmp_osfp10.a:

  what /usr/opt/kf9BASE430/libkmp_osfp10.a

  
  This command returns the KAP version:

  Version BL31.1_posix_10

1.3.4 Disk Space Requirements

The Compaq KAP Fortran/OpenMP installation procedure loads files into the following directories:

/usr/opt /usr/bin /usr/man/man1 /usr/lib

Table 1-1 KAP Subset Sizes with Tru64 UNIX

Subset Name	/usr/opt	/usr/bin	/usr/man/man1
KF9BASE430	14 MB	50 bytes	50 bytes

Compare the space required for subsets with the free space currently on the disks where Compaq KAP Fortran/OpenMP files will reside.

To determine the current amount of free space for a directory path, log in to the system where you plan to install Compaq KAP Fortran/OpenMP. You can check which file systems are mounted, and where they are, by displaying the file /etc/fstab. For example:

# more /etc/fstab /dev/rz0a / ufs rw 1 1 /dev/rz0g /usr ufs rw 1 2 /dev/rz0b swap1 ufs rw 0 2 /dev/rz1c swap2 ufs sw 0 2 /dev/rz0f /usr/users ufs rw 1 2

The previous display indicates that /usr (mounted to /dev/rz0g ) is the only mount point that affects where Compaq KAP Fortran/OpenMP files will reside; the system has only one local disk drive and the /usr/opt file system resides in the g partition of the disk on that drive.

Enter the df command to determine total space and free space for the one or two file systems where Compaq KAP Fortran/OpenMP files will reside. Based on the previous display of the /etc/fstab file, which shows that only /usr is a mount point, you would only need to inspect free space in the /usr file system:

# df /usr Filesystem Total blks blks % node 512-blks used free used Mounted on /dev/rz0g 793406 624892 89172 88% /usr

The previous display indicates that there are 89172 blocks (512 bytes per block) free. This free space accommodates the subset requirements listed in Table 1-1 for the /usr/opt file system.

On systems where /usr/opt is mounted to different devices from /usr, enter the following command:

# df /usr/opt

In this case, you compare space required for Compaq KAP Fortran/OpenMP files in /usr/opt to the free space displayed in the output list.

If you find that there is insufficient disk space for the Compaq KAP Fortran/OpenMP subsets, and know that you have additional space on alternative disks or disk partitions for your system, you can take the following steps before installation:

1. Log in as superuser.
2. Specify in the /etc/fstab file that one or more of the newly created directories are mount points to new disk partitions where there is additional space.
3. Enter the mount -a command so that the new mount points take effect.

Compaq recommends that you back up your system disk before installing any software. Use the backup procedures established at your site. For details about performing a system disk backup, see your Tru64 UNIX documentation.

1.5 Stopping the Installation

You can stop the installation procedure at any time by pressing Ctrl/C. However, files created up to that point are not deleted. You must delete these files interactively. Appendix A lists the files and directories created during the installation procedure.

1.6 Recovering from Errors

If errors occur during the installation, the system displays failure messages. If the installation fails due to insufficient disk space, the installation procedure displays the following message:

There is not enough file system space for subset KF9BASE430. KF9BASE430 will not be loaded.

If any of the following conditions exist, errors can occur during the installation:

• The operating system version is incorrect.
• The prerequisite software version is incorrect.
• The system parameter values for successful installation are insufficient.

For descriptions of error messages generated by these conditions, see the Tru64 UNIX documentation on system messages, recovery procedures, and Tru64 UNIX software installation. If you are notified that any of these conditions exist, take the appropriate action described in the message. For information about software requirements, see Section 1.3.3.

This chapter describes the procedures for installing Compaq KAP Fortran/OpenMP on a Tru64 UNIX system.

2.1 Installing Compaq KAP Fortran/OpenMP

This section explains how to start an installation procedure directly from the CD-ROM and how to respond to installation procedure prompts.

2.1.1 Starting the Installation Procedure

Start the KAP installation procedure from CD-ROM as follows:

1. Mount the media on the appropriate drive.
2. Log in as superuser (the login name is root) to the system where you are installing Compaq KAP Fortran/OpenMP.
3. Make sure that you are at the root ( / ) directory by entering the following command:

   # cd /

4. Specify the /mnt directory to be the mount point for the distribution file system on the drive. If your CD-ROM drive is rz4c, enter the following command:

   # /usr/sbin/mount -r /dev/rz4c /mnt

   
   Do not give this command from /mnt.

5. Confirm that the KAP software is accessible:

   # ls -ld /mnt/k*

6. Enter a setld command that requests the load function and identifies the directory in the mounted file system where Compaq KAP Fortran/OpenMP subsets are located.
   The directory location for the KAP subsets is /mnt/kf9430. To load Compaq KAP Fortran/OpenMP subsets onto a Tru64 UNIX system, enter the following command:

   # /usr/sbin/setld -l /mnt/kf9430/kit KF9BASE430

This section explains the installation procedure prompts and displays.

2.1.2.1 Loading the KF9BASE430 Kit

After you enter the setld command, the installation procedure displays the following message:

Checking file system space required to install specified subsets:

When the file system space checks okay, the KF9BASE430 kit begins to load, and the system displays a series of messages described in Section 2.1.2.2.

2.1.2.2 Monitoring Displays During the Subset Loading Process

Among the displayed messages, you are notified that KAP is a licensed product:

This product is REGISTERED LICENSED SOFTWARE. Product: KAP FORTRAN/OpenMP Producer: KUCK Version: 4.3 Issuer: DEC The Product Authorization Key (PAK) must be registered with the LICENSE MANAGEMENT FACILITY.

You are then asked if the KAP License PAK is registered. Enter y if your License PAK is registered.

Is the PAK registered and loaded? [y/n] y

After you respond to the registration question, the Installation Verification Procedure begins and displays the following information:

KAP Fortran/OpenMP Installation Verification Procedure (IVP) Version: 4.3 k3105169 000601 KAP Fortran/OpenMP IVP passed Optimization Compilation test KAP Fortran/OpenMP IVP passed Object Execution Test KAP Fortran/OpenMP IVP executed correctly

The installation ends with the following message:

KAP Fortran/OpenMP V4.3 is properly installed.

If you encounter errors during the installation, see the Diagnostics section of the setld(8) reference page for an explanation of the error and the appropriate action to take.

If the verification process fails, you can look in the file /usr/var/adm/fverify to find information that can help you diagnose the problem.

After you correct the installation problem, use the following command to delete the KAP subset before you reinstall the product:

# /usr/sbin/setld -d KF9BASE430