BASEstartm Open DAS
for Allen-Bradley Data Highwaytm
on Tru64tm UNIX
Installation and User's Guide


Previous Contents Index

3.2.3 Read and Write Data Point Functions

Use the read data point and write data point functions to read data from and write data to a device in a device independent way.

Table 3-4 lists the read and write data point functions available through the BASEstar Open (CLI) interface and BASEstar Open (API) interface.

Table 3-4 Read and Write Data Point Interface Access
Interface Function Name
CLI GET VALUE DATA_POINT
  PUT VALUE DATA_POINT
API bstr_data_point_get_value
  bstr_data_point_put_value

Example 3-4 shows examples of creating a device data point using the CREATE DEVICE_DATA_POINT command.

Example 3-4 DEVICE_DATA_POINT CREATE Command

BSTR> CREATE DEVICE_DATA_POINT /plc_2_15/p1 \
                    -DATATYPE UNSIGNED_16 \
                    -UPDATE_POLICY SOLICITED \
                    -ACCESS_POLICY ALWAYS \
                    -DEVICE_ACCESS RDWR \
                    -VMD_NAME plc_2_15 \
                    -VAR_NAME p1 \
                    -VAR_CLASS UNNAMED
BSTR> CREATE DEVICE_DATA_POINT /plc_3/p1 \
                    -DATATYPE INTEGER_16 \
                    -UPDATE_POLICY SOLICITED \
                    -ACCESS_POLICY ALWAYS \
                    -DEVICE_ACCESS RDWR \
                    -VMD_NAME plc_3 \
                    -VAR_NAME p1 \
                    -VAR_CLASS UNNAMED
BSTR> CREATE DEVICE_DATA_POINT /plc_5_40/p1 \
                    -DATATYPE BIT \
                    -UPDATE_POLICY SOLICITED \
                    -ACCESS_POLICY ALWAYS \
                    -DEVICE_ACCESS RDWR \
                    -VMD_NAME plc_5_40 \
                    -VAR_NAME p1 \
                    -VAR_CLASS UNNAMED
BSTR> CREATE DEVICE_DATA_POINT /plc_5_40/p2 \
                    -DATATYPE WORD_ARRAY_10 \
                    -UPDATE_POLICY SOLICITED \
                    -ACCESS_POLICY ALWAYS \
                    -DEVICE_ACCESS RDWR \
                    -VMD_NAME plc_5_40 \
                    -VAR_NAME p2 \
                    -VAR_CLASS UNNAMED
BSTR> CREATE DEVICE_DATA_POINT /plc_5_40/p3 \
                    -DATATYPE PLC_5_COUNTER \
                    -UPDATE_POLICY SOLICITED \
                    -ACCESS_POLICY ALWAYS \
                    -DEVICE_ACCESS RDWR \
                    -VMD_NAME plc_5_40 \
                    -VAR_NAME p3 \
                    -VAR_CLASS UNNAMED
BSTR> CREATE DEVICE_DATA_POINT /slc_5_04/p1 \
                    -DATATYPE INTEGER_16 \
                    -UPDATE_POLICY SOLICITED \
                    -ACCESS_POLICY ALWAYS \
                    -DEVICE_ACCESS RDWR \
                    -VMD_NAME slc_5_04 \
                    -VAR_NAME p1 \
                    -VAR_CLASS UNNAMED

Example 3-5 shows the information displayed when you enter the GET VALUE DATA_POINT command.

Example 3-5 DATA_POINT GET VALUE Output

BSTR> GET VALUE DATA_POINT /plc_5_40/p1
20
BSTR> GET VALUE DATA_POINT /plc_5_40/p2
array[10] of INTEGER_16 
  [ 0]: 0 
  [ 1]: 0 
  [ 2]: 0 
  [ 3]: 0 
  [ 4]: 0 
  [ 5]: 0 
  [ 6]: 0 
  [ 7]: 0 
  [ 8]: 0 
  [ 9]: 0
BSTR> GET VALUE DATA_POINT /plc_5_40/p3
structure PLC_5_COUNTER 
{ 
  CONTROL: 0 
  PRE: 0 
  ACC: 0 
}

Example 3-6 shows the information displayed when you enter the PUT VALUE DATA_POINT command.

Example 3-6 DATA_POINT PUT VALUE Output

BSTR> PUT VALUE DATA_POINT /plc_5_40/p1
(Bit) : 1
BSTR> PUT VALUE DATA_POINT /plc_5_40/p2
array[10] of INTEGER_16 
  [ 0]: (Integer 16) : 1
  [ 1]: (Integer 16) : 2
  [ 2]: (Integer 16) : 3
  [ 3]: (Integer 16) : 4
  [ 4]: (Integer 16) : 5
  [ 5]: (Integer 16) : 6
  [ 6]: (Integer 16) : 7
  [ 7]: (Integer 16) : 8
  [ 8]: (Integer 16) : 9
  [ 9]: (Integer 16) : 10


Previous Next Contents Index