Welcome to Amptron.Com - PM-7900 Online Manual Page 3
Click here to find out how you can buy an Amptron Motherboard!

Online Manual Menu Bar
PM-7900 MEMORY SETTINGS
 THE CACHE MEMORY
 SOME CACHE MEMORY CONSIDERATIONS 
 POSSIBLE CACHE MEMORY CONFIGURATIONS 
 
 THE MEMORY 
 SOME MEMORY CONSIDERATIONS 
 VOLTAGE REQUIREMENTS 
 POSSIBLE MEMORY CONFIGURATIONS   
 
The Cache Memory
This system board is equipped (built-in) with a 160-pin Dual Readout Socket for either a 256KB or a 512KB Pipeline Burst Cache module for its Second Level Cache (L2).
 
Some Cache Memory Considerations:
 Maximum Second Level Cache can not exceed 512KB.
  
Possible Cache Memory Configurations:
=================
CACHE     TOTAL    
MODULE    CACHE     
-----------------
256KB      256KB
512KB      512KB
=================
The Memory
This system board can support up to 128MB main memory wtih 4 auto banking 72-pin SIMM slots for Fast Page Mode or EDO DRAM, and 1 168-pin DIMM socket for Fast Page Mode DRAM, EDO DRAM, or SDRAM.
 
Some Memory Considerations:
 If Bank 0 of SIMM sockets is to be used, then the DIMM socket CANNOT be used.
 If the DIMM socket is to be used, then Bank 0 of SIMM sockets CANNOT be used.
 All SIMM sockets are compatible with Fast Page Mode and EDO DRAM SIMM modules.
 The DIMM socket is compatible with Fast Page Mode, EDO DRAM and SDRAM modules.
 If a SDRAM module is installed in the DIMM socket, jumper JP7 must be set to 3.3V.
  Maximum memory on-board can not exceed 128MB in any combination.
 
Voltage Requirements:
There are 2 categories of memory modules in regard to their voltage requirement. The memory modules' voltage requirement must be obtained from the manufacturer of the memory modules. However, the following can serve as a general guideline.
 SIMM - Fast Page Mode & EDO DRAM, can be 3.3V or 5.0V.
 DIMM - Fast Page Mode & EDO DRAM, can be 3.3V or 5.0V.
 DIMM - SDRAM (Sync. DRAM), can be 3.3V only.
 All SIMM sockets are for 5.0V memory modules only.
 The DIMM socket is compatible with 3.3V and 5.0V memory modules.
 
Possible Memory Configurations:
============================================
   |-BANK 0-------| |-BANK 1-------|    
#   SIMM1  SIMM2   SIMM3  SIMM4  DIMM    
--------------------------------------------
1   4-32MB  4-32MB    NONE    NONE    NONE    
2    NONE    NONE    4-32MB  4-32MB   NONE   
3   4-32MB  4-32MB   4-32MB  4-32MB   NONE   
4    NONE    NONE    4-32MB  4-32MB  8-128MB  
5    NONE    NONE     NONE    NONE   8-128MB 
============================================
 

Return to the Main Menu

 
[ Main Menu | [ Products | Tech Support | Download ]
[ Credit Info | RMA Online | Company Profile

(C) 1997 Amptron International Inc
Specifications subject to change without notice
All trade marks and brand names are acknowledged 
as belonging to their respective owners.

Comments, Suggestions, Email the Webmaster
  
A Symbol of Value!
 
 
 SYSTEM BOARD
 

ProductsTechnical SupportDownloads