Historical Archive - Intel® OCPRF100 Server Platform

Identify your products

Product Discontinuance Announcement: Intel® will no longer provide interactive support for these products via telephone or e-mail

Technical specifications

Board Technical Product Specification: Product overview, including descriptions and diagrams of the integrated features
Technical Product Specifications [PDF]

System Technical Product Specification: Product overview, including descriptions and diagrams of the integrated features
Technical Product Specifications [PDF]

Installation and use

Power Cord Specifications: For North America, the cord must be UL Listed/CSA Certified, 14/3, 75°C type SJT with NEMA 6-15P attachment plug for 110 VAC operation and IEC 320, C19 input connector.
For outside North America, the cord must be flexible VDE certified or HAR (harmonized) rated 250 V, 0.75 mm minimum conductor size with IEC 320, C19 input connector. The AC wall attachment plug shall be a three conductor grounding type and must be for the configuration in the specific region or country. The AC wall attachment plug must bear the safety agency certification mark for the specific region or country intended for installation.
The cord must be no longer than 4.5 meters (14.76 ft.).
The maximum power consumption expectations of the OCPRF100 MP Server System are as follows:
12 Amp max while operating at 110 VAC.
7 Amp max while operating at 220 VAC.

Server Platform Upgrade Procedure: This document describes the technical procedures to upgrade the system hardware from a 4-way Intel® AC450NX to an 8-way Intel® OCPRF100
Platform Upgrade Procedure [PDF]

Compatibility

Tested Processors: The Intel® OCPRF100 MP Server Platform supports 500 MHz and 550 MHz Intel® Pentium® III Xeon® processors. It does not support 700 MHz processors.

Technical advisories

TA 0329: Microsoft* Windows* 2000 may report less than 4GB memory: TA-0329 [PDF]