Browse code
One more change
AmiSapphire authored on 2022/04/16 00:03:56
Showing 1 changed files
Browse code
Update bill of materials file; stripped too much in editing
AmiSapphire authored on 2022/04/15 23:56:00
Showing 1 changed files
Browse code
Add bill of materials to repo
AmiSapphire authored on 2022/04/15 23:50:53
Showing 1 changed files
| 1 | 1 |
new file mode 100644 |
| ... | ... |
@@ -0,0 +1,41 @@ |
| 1 |
+"Classic 47" Variant Bill of Materials |
|
| 2 |
+ |
|
| 3 |
+ |
|
| 4 |
+Capacitors |
|
| 5 |
+Note: Cap brands are listed here for historical note only. |
|
| 6 |
+ |
|
| 7 |
+Electrolytic |
|
| 8 |
+CD1, CD4, CD5, CD8 - 47uf 25V [Elna RE3] - Quantity: 4 |
|
| 9 |
+CD2, CD3, CD6, CD7 - 47uf 63V [Panasonic FC] - Quantity: 4 |
|
| 10 |
+CD9 - 220uf 35V [Nippon Chemicon LXZ] - Quantity: 1 |
|
| 11 |
+ |
|
| 12 |
+Film |
|
| 13 |
+C1 - 100nf 100V [EPCOS - TDK Electronics B32529] - Quantity: 1 |
|
| 14 |
+ |
|
| 15 |
+ |
|
| 16 |
+Resistors |
|
| 17 |
+Note: All resistors are metal film type at 1% tolerance, rated at 0.25W. |
|
| 18 |
+ |
|
| 19 |
+RE8, RE10 - 2K - Quantity: 2 |
|
| 20 |
+RE7, RE9, RE13 - 10K - Quantity: 3 |
|
| 21 |
+RE1, RE2, RE3, RE4, RE5, RE6 - 22K - Quantity: 6 |
|
| 22 |
+RE11, RE12 - 100K - Quantity: 2 |
|
| 23 |
+ |
|
| 24 |
+ |
|
| 25 |
+ICs |
|
| 26 |
+IC1, IC2 - LM358, NE5532, TL072, TLE2072 - Quantity: 2 |
|
| 27 |
+ |
|
| 28 |
+ |
|
| 29 |
+Misc |
|
| 30 |
+IC1, IC2 - 8-Pin Sockets - Quantity: 2 |
|
| 31 |
+GND, VCC - Power Tap, 2-pin - Quantity: 1 |
|
| 32 |
+PHONE1, PHONE2 - 3.5mm Phono Jacks - Quantity: 2 |
|
| 33 |
+RP1 - Potentiometer [Bourns PTD90-like], 50KOhm - Quantity: 1 |
|
| 34 |
+LED1 - LED, 3mm to 5mm - Quantity: 1 |
|
| 35 |
+GND (right edge) - wire shield to ground/earth |
|
| 36 |
+ |
|
| 37 |
+ |
|
| 38 |
+Notes |
|
| 39 |
+RP1 is based on the Bourns PTD90 series 2-ganged potentiometer on the original |
|
| 40 |
+PCB. If the build is used for another design, any 50K ohm, dual-ganged linear |
|
| 41 |
+potentiometer can be used. |
|
| 0 | 42 |
\ No newline at end of file |