DOCUMENT:Q122054 01-OCT-1999 [win95x] TITLE :Information: PCMCIA Slot Specifications and Types PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:WINDOWS:3.1,3.11 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows versions 3.1, 3.11 - Microsoft Windows for Workgroups versions 3.1, 3.11 ------------------------------------------------------------------------------- SUMMARY ======= This article contains a list of PCMCIA card sizes and types. MORE INFORMATION ================ Physical Specifications ----------------------- PCMCIA cards have one of the following standard physical dimensions: Type I Card 54 mm by 85.6 mm by 3.3 mm Type II Card 54 mm by 85.6 mm by 5 mm Type III Card 54 mm by 85.6 mm by 10.5 mm The PCMCIA card size is the same as a standard credit card except for thickness and corner rounding. Sometimes PCMCIA cards are referred to as credit-card memory or adapters. Certain Toshiba notebook computers and other machines have a non-standard, oversized slot for which there are non-standard, oversized cards ranging from 14.5 millimeter (mm) to 16 mm (or more) thick. These cards and slots are sometimes incorrectly referred to as "Type IV." This size card will probably not become part of the PCMCIA standard. A Type II card has the same thickness as a Type I card along the long sides and connector end; this provides mechanical compatibility. A bubble 0.85 mm thick on the top and bottom surfaces increases the card's total thickness to 5 mm. A Type III card has a additional 5.5 mm on the top surface bubble for a total thickness of 10.5 mm. The standard allows a maximum card length of 135.6 mm, which means the card can extend outside the host. This accommodates bulky devices such as batteries, oversized connectors, removable media, transceivers, and the antenna required by some devices. Additional query words: 3rdparty 3.10 3.11 slot slots bigger larger big large ====================================================================== Keywords : Technology : kbAudDeveloper kbWin3xSearch kbWFWSearch kbZNotKeyword3 kbWin310 kbWin311 kbWFW310 kbWFW311 Version : WINDOWS:3.1,3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.