DOCUMENT:Q181263 27-FEB-2002 [exchange]
TITLE :XCON: Exchange Sends Message Without Valid O/R Address
PRODUCT :Microsoft Exchange
PROD/VER::5.0,5.5
OPER/SYS:
KEYWORDS:kbusage exc5 exc55
======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Exchange Server, versions 5.0, 5.5
-------------------------------------------------------------------------------
SYMPTOMS
========
There are three known symptoms:
1. Users receive non-delivery-reports (NDRs) such as below:
Your message did not reach some or all of the intended recipients.
Subject: <subject>
Sent: <date> <time>
The following recipient(s) could not be reached:
'/O=ORG/OU=SITE/CN=RECIPIENTS/CN=USERA' on 24.11.97 18:24
The recipient name is not recognized
MSEXCH:MSExchangeMTA:Site:Server
2. In rare cases, the association to a third-party X.400 system may stop
responding.
3. In rare cases, the sending Exchange message transfer agent (MTA) may show 100
percent CPU usage.
CAUSE
=====
In a non-replicated environment, the Exchange MTA may not be able to resolve a
recipient's distinguished name within the Exchange directory. Non- resolvable
distinguished names result usually from invalid recipient entries in the
personal address book (PAB) of a user. If there is an X.400 Connector with an
address space of 'C=*' defined, the MTA may attempt to send a message destined
for such a recipient via this connector. In doing so, the MTA does not generate
a valid X.400 O/R address but uses the recipient's distinguished name as an
X.400 directory name.
RESOLUTION
==========
To resolve this problem, Exchange sites connected via an X.400 Connector with an
address space of 'C=*' defined, should be configured as Connected Sites in the
X.400 Connector's Connected Sites property page. If this resolution is not
possible, obtain the following fix or wait for the next Exchange service pack.
STATUS
======
Microsoft has confirmed this to be a problem in Exchange Server versions 5.0.
A supported fix for both versions is now available, but has not been fully
regression-tested and should be applied only to systems experiencing this
specific problem. Unless you are severely impacted by this specific problem,
Microsoft recommends that you wait for the next Service Pack that contains this
fix. Contact Microsoft Technical Support for more information.
Microsoft has confirmed this to be a problem in Microsoft Exchange Server version
5.5. This problem has been corrected in the latest U.S. Service Pack for
Microsoft Exchange Server version 5.5. For information on obtaining the Service
Pack, query on the following word in the Microsoft Knowledge Base (without the
spaces):
S E R V P A C K
MORE INFORMATION
================
All occurrences of the problem described here involve two or more non-
replicated Exchange sites. Additionally, there must be a connector defined with
the "catch-all" address space of 'C=*'.
For the above symptoms 2, association is hanging, and 3, MTA causes 100 percent
CPU usage, an intermediate third-party X.400 system must be involved.
There are currently three known reasons for the existence of a distinguished name
that cannot be resolved in a user's PAB:
1. A user has been moved to a different non-replicated Exchange site. During
this move, the user kept his or her PAB containing recipients defined in the
original site's directory. NOTE: Moving PABs to non-replicated sites is not
supported.
2. A user has been deleted from the directory, but the user has the deleted
recipient still as an entry in his or her PAB.
3. This scenario involves two Exchange Server computers, referred to as ServerA
and ServerB in the following. It involves three Exchange users: UserSend,
UserForward, and UserReceive. UserSend and UserForward are located on
ServerA. UserReceive is located on ServerB.
ServerA and ServerB are connected via an X.400 Connector. Both sides of the
X.400 Connector have an address space defined that represents the other
server's site addressing. ServerB has an additional X.400 Connector defined
to either a third Exchange Server computer or a foreign X.400 MTA. The
address space on that connector is defined as "C=*". The "X.400 bodypart used
for message text" on the connector's Advanced property page must have
different settings on both ends of the connector; for example, IA5 on ServerA
and IA5 (German) on ServerB.
UserSend sends a message to UserForward. UserForward sends a message to
UserReceive, inserting the message received from UserSend as attachment to
this message. When UserReceive opens the attached message, UserReceive will
be able to add UserSend to his or her PAB. Viewing the just added e-mail
address, it will be evident that it is a pure distinguished name. This
distinguished name cannot be resolved within ServerB's directory.
Additional query words: hang utilization NDR invalid Address
======================================================================
Keywords : kbusage exc5 exc55
Technology : kbExchangeSearch kbExchange500 kbExchange550 kbZNotKeyword2
Version : :5.0,5.5
Issue type : kbprb
Solution Type : kbfix
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 2002.