INSTALLING  THE  DRIVER (During a fresh Win2K installation)
#################################################################################
#################################################################################
Follow the standard procedures for setting up Win2K installation.

1. During the first part of the setup procedure, copy all the drivers from the 
   CD PRO (CDROM:\RAID\HighPoint) and installation file must be located
   on the same directory of the install floppy diskette.

2. Win2K will prompt you to press F6 to specify an additional device. Press F6,
   and let Windows continue on with setup. It will continue to scroll through 
   various device listings for several minutes, then prompt you to press the 
   "S" key to Add a device.
   
3. Press S, and insert the HighPoint driver diskette. Press Enter when prompted 
   and allow Win2K to install the Highpoint drivers.

4. Win2K will continue and complete the installation procedure.




INSTALLING  THE  DRIVER (With Operating system already installed)
#################################################################################
#################################################################################
If the controller is not detected automatically,follow the instructions as 
prompted by the system to install the HighPoint driver.

1.  Windows 2000 must be installed on the system prior to installing the driver.

2.  Press "Start" button then Move to "Settings" and select "Control Panel".

3.  Double click on "System" icon. 

4.  Click on the "Hardware" button and Click on the "Device Manager" button.

5.  Double click the "RAID Controller" node.

6.  Select "Driver" button to Update driver and Click Next.

7.  Select "Serch for a suitable driver for my device" and Click Next.

8.  Select "Specify a location" press Next and Click Browse button.

9.  Follow the instruction to insert your CD PRO to install the driver.
    Locate File <CD-ROM:\Raid\HighPoint\Win_2000> and Click OK.
   
10. Click Next button and Completing the Upgrade Device Driver Wizard. 
    then Click on the "Finish" button and Restart the system.