ZVHDD 2.22 --Award EliteBIOS v4.51GPM Zero-Volt Partition Utility
(C) Award Software 1998 All Rights Reserved .

 Usage : ZVHDD  [Option]
Options:
   /C  (/FILE or /PARTITION) [/M:memsize] Creat Zero-Volt File or Partition 
   /D  (/FILE or /PARTITION)              Delete Zero-Volt File or Partition 
   /R                                     Reformat Zero-Volt Partition 
Parameters :
   /M : memsize         Specifies the onboard memory size (MB) of the system
                        , Available size is from 1 to 256.


Suspend Mode Option
      When an ATX power supply installed, this feature offers an advanced way
 to saving more power and prompt your system performance. If you stay with the 
default setting, PowerOn Suspend option, the system will enter the suspend mode
(monitor off, CPU off) from full-on power status by press the power button. If 
set at Suspend to Disk, however, the status will directly back to the working 
stage of the system at the moment that is off . This can be done owing to the 
system saves all the configurations to the hard disk first (hard disk must have 
sufficient space to accomondate these data), then shut off. For using this 
feature,a command (see the NOTE below) is needed to be excuted while booting 
the system.The options are : PowerOn Suspend (Default), Suspend to Disk.

Note :
1.If your system is Windows 95, 98 or DOS , it is recommended to execute the
  command : ZVHDD /c /file. The hard disk available space must be larger than 
  memory space plus 4MB.
2.If your system is Windows NT or OS2, it is recommended to execute the command:
  ZVHDD /c /partition. This create a new partition in the hard disk. It is 
  important to make sure that at least one partition is not used. 