INSTALLING  THE  DRIVER (During a fresh WinXP installation)
#################################################################################
#################################################################################
Follow the standard procedures for setting up WinXP installation.

1. During the first part of the setup procedure, copy the drivers from 1stUtilities 
   CD (CDROM:\RAID\Promise\Raid\*.*) including all directories/files to floppy diskette.

2. WinXP will prompt you to press F6 to specify an additional device. Press F6,
   and let Windows continue on with setup. It will continue to scroll through 
   various device listings for several minutes, then prompt you to press the 
   "S" key to Add a device "WinXP Promise FastTrak100 (tm) Lite Controller".
   
3. Press S, and insert the Promise driver diskette. Press Enter when prompted 
   and allow WinXP to install the Promise drivers.

4. WinXP will continue and complete the installation procedure.




INSTALLING  THE  DRIVER (With Operating system already installed)
#################################################################################
#################################################################################
If the controller is not detected automatically,follow the instructions as 
prompted by the system to install the Promise driver.

1.  Windows XP must be installed on the system prior to installing the driver.

2.  Press "Start" button then Move to "Settings" and select "Control Panel".

3.  Double click on "System" icon. 

4.  Click on the "Hardware" button and Click on the "Device Manager" button.

5.  Double click the "RAID Controller" node.

6.  Select "Reinstall Driver..." button to Update driver and Click Next.

7.  Select "Install from a list or specific location..." and Click Next.

8.  Select "Search for the best driver in these location:".

9.  Follow the instruction to insert your 1stUtilities CD to install the driver.
    Browse Locate File <CD-ROM:\Raid\Promise\Raid\WinXP> and Click Next.
  
10. Press "Continue Anyway" Completing the Upgrade Device Driver Wizard. 
    then Click on the "Finish" button and Restart the system.