INSTALLING  THE  DRIVER (During a fresh WinNT installation)
#################################################################################
#################################################################################
Follow the standard procedures for setting up WinNT installation.

1. During the first part of the setup procedure, copy the drivers from 1stUtilities 
   CD (CDROM:\RAID\Promise\Raid\*.*) including all directories/files to floppy diskette.

2. WinNT will prompt you to press F6 to specify an additional device. Press F6,
   and let Windows continue on with setup. It will continue to scroll through 
   various device listings for several minutes, then prompt you to press the 
   "S" key to Add a device "WinNT Promise ULTRA100 (tm) Controller".
   
3. Press "S", and insert the Promise driver diskette. Press Enter when prompted 
   and allow WinNT to install the Promise drivers.

4. WinNT will continue and complete the installation procedure.




INSTALLING  THE  DRIVER (With Operating system already installed)
#################################################################################
#################################################################################
If the controller is not detected automatically,follow the instructions as 
prompted by the system to install the Promise driver.

    1.  Open My Computer.
    2.  Open Control Panel.
    3.  Double click SCSI Adapters icon.
    4.  Click Drivers button.
    5.  Click Add...
    6.  Click Have Disk...
    7.  Insert the 1stUtilities CD containing Promise WinNT 4.0 device driver
        into CDROM, and Browse "CDROM:\RAID\Promise\ATA100\NT4", 
        then click OK.
    8.  Select "WinNT Promise Ultra100(tm) IDE Controller",then click OK.
    9.  When asked to restart your computer, click Yes.