This procedure loads the PSE files onto the system where you perform
the installation.
Follow these steps to install the PSE software from CD-ROM media:
- Mount the media on the appropriate disk drive.
- Log in as superuser (login name root) to the system where you
will install the PSE software.
- Make sure that you are at the root (/) directory by entering
the following command:
# cd /
- Specify the /mnt directory to be the mount point for
the distribution file system on the drive. If your drive is
rzxxc, enter the following command:
# mount -rd /dev/rzxxc /mnt
- Enter a setld command that requests the load function (-l)
and identifies the directory in the mounted file system where the
PSE subsets are located.
For example, if the directory location for these subsets is
/mnt/pse190/kit, enter
the following command:
# setld -l /mnt/pse190/kit
The installation procedure now displays the names of the PSE subsets
and asks you to specify the subsets you want to load.
See Section 4.3 to continue the
installation.