Copyright © Digital Equipment Corporation. 1997.
All Rights Reserved.
The KAP switches table lists the settings of the command switches related to optimization used for this program unit. Some of the values may be changed within the program unit by using directives. Not all of these switches can be changed by the user.
The following example shows the switch settings KAP used to optimize
the source code. In this example, the -tune switch
appears as the -architecture switch.
KAP/Digital_UA_F 3.2 k301117 971123 ATIMESB Transformed 26-Nov-1997 15:02:48
Page 1
Switches Used for this Program Unit
no aggressive no library_calls
align_common=1
align_struct=4
tune=EV4
arclimit=5000 limit=10
assume=cel lines=55
list=mat.out
listingwidth=132
cacheline=32,32 listoptions=klo
cache_prefetch_line_count=0 logical=4
cachesize=8
no case machine=s
chunk=1
cmp=mat.cmp miifg=500
no cmpoptions minconcurrent=1000
no concurrentize
no namepartitioning
datasave
directives=akpv optimize=5
no dlines
dpregisters=32 no onetrip
eiifg=20 no parallelio
processors=1
fpregisters=32 psyntax=kap
no fuse real=4
fuselevel=0
no guide
heaplimit=116 no recursion
hli=1 roundoff=3
no ignoreoptions save=manual
no include
no inline scalaroptimize=3
no inline_and_copy scan=72
no inline_create scheduling=e
inline_depth=2 setassociativity=1
no inline_from_files no skip
no inline_from_libraries no srlcd
inline_looplevel=2 no suppress
no inline_manual no syntax
inline_optimize=0
input=mat.f
integer=4
interchange
interleave no type
no ipa
no ipa_create unroll=4
ipa_depth=2
no ipa_from_files unroll2=160
no ipa_from_libraries unroll3=20
ipa_looplevel=2
no ipa_manual
ipa_optimize=0
Copyright © Digital Equipment Corporation. 1997.
All Rights Reserved.