Deskpro 386S

FEATURES AND SPECIFICATIONS

CONFIGURATION

SPARE PART NUMBERS

OPTION PART NUMBERS


FEATURES AND SPECIFICATIONS

SYSTEM BOARD

HARD DRIVE

ROMS

TAPE DRIVES

PROCESSOR UPGRADES


CONFIGURATION

HARD DRIVE

MEMORY

SYSTEM BOARD

VIDEO


SPARE PART NUMBERS  ** OBSOLETE **

CABLES

CONTROLLER BOARDS

DISKETTE DRIVES

HARD DRIVES

TAPE DRIVES

SYSTEM BOARDS

ROMS


OPTION PART NUMBERS ** OBSOLETE **

MEMORY

COPROCESSOR

SERIAL/PARALLEL INTERFACE BOARD

TAPE DRIVE

VIDEO


SPARE PART NUMBERS - DISKETTE DRIVES

Drive Size	Spare PN
360 KB	112567-001
1.2 MB	112566-001
1.44 MB *	112565-001
1.44 MB **	122392-001
Diskette Adapter Kit	118686-001

* Requires MS-DOS Version 3.31 Revision A if installed as drive B, and MS-DOS

  Version 3.31 Revision B if installed as drive A.

** Used only with system board Assy No. 002116.


SPARE PART NUMBERS - HARD DRIVES

Drive Size	Drive Type	Interleave	Integrated	Minimum ROM	Spare PN	Assy No.
20 MB	2	1:1	Yes	M.3	114465-001	NA
20 MB	2	3:1	Yes	M.3	112527-001	NA
40 MB	22	1:1	Yes	M.3	122187-001	NA
40 MB	43	1:1	Yes	M.3	112526-001	NA
60 MB	55	1:1	Yes	P.4	122079-001	NA
84 MB	27	1:1	Yes	M.3	112438-001	NA
110 MB	33	1:1	Yes	M.3	112525-001	NA
120 MB	50	1:1	Yes	P.4	122080-001	NA
210 MB	51	1:1	Yes	P.4	124013-001	NA
320 MB	28	1:1	No	N.4	115182-001	001283
(Model 1						001628
only)						WD1009
Hard Drive Expansion Unit 300MB					113219-001++	001283
					113215-001 **	001472

++ Black Bezel

** Grey Bezel


SPART PART NUMBERS - SYSTEM BOARDS

Product	Assy No.	Spare PN	Switch/Jumper
386SX System Board	000954 *	112572-001	Yes
386SX System Board	001145	112572-001	Yes
386SX System Board	001148 è	112572-001	Yes
386SX System Board	001157	112572-001	Yes
386SX System Board	001644	112572-001	Yes
386SX System Board	002116 ð	126532-001	Yes

* Comes with VGC Board (Assy No. 001059) mounted on system board.

è Comes with 1 MB Memory Module (Assy No. 000981 or 001076) mounted on system board.

ð Includes VGA capability.  Used ONLY in systems with a "256 VGA" label applied to the rear of the unit.  Not available in the United States and Canada.


SPARE PART NUMBERS - CONTROLLER BOARDS

Product	Assy No.	Spare PN	Switch/Jumper
Advanced ESDI Controller Board	WD1009	122370-001	Yes
Tape Adapter Board (135 MB and 150/250 MB)	000774	113259-001	Yes
ESDI External 300/600 MB Hard Drive Controller   Board	001091	115839-001	Yes
15 MHz ESDI Controller Board	001283	121667-001	Yes
15 MHz ESDI Controller Board	001628	121667-001	Yes
ESDI/Diskette Controller   Board	001472	115374-001	Yes


 SPARE PART NUMBERS - ROMS

System ROM Revisions (Spare PN 112564-001)

System Board Assy Nos. 000994, 001145, 001148, 001157, 001644

Revision	PN on ODD ROM	PN on EVEN ROM
M.3	112593-008	112594-008
N.2	112593-009	112594-009
N.4	112593-010	112594-010
N.5	112593-011	112594-011
P.3	112593-012	112594-012
P.4	112593-013	112594-013

System ROM Revisions (Spare PN 122171-001)

System Board Assy No. 002116

Revision	PN on ROM
042590	122134-003
081390	122134-004
110691	126523-005


GENERAL - SYSTEM BOARD

Expansion Slots	Type
Slot 1	8/16 bit full sized
Slot 2	8/16 bit full sized
Slot 3	8/16 bit full sized
Slot 4	8/16 bit full sized
Slot 5	16 bit high speed (reserved for the
	16 MHz Memory Expansion Board)
System Unit	Specifications
Dimensions:
Height	5.9 in. (14.9 cm)
Depth	14.8 in. (37.5 cm)
Width	15.8 in. (40.1 cm)
Weight:
Model 84	28.0 lb (12.7 kg)
Model 40	28.0 lb (12.7 kg)
Model 1	27.0 lb (12.2 kg)
Power Supply:
Operating Voltage	120V, 60 Hz (230V, 50 Hz)
Steady State Power	140W
Peak Power	175W
Temperature Range:
Operating	50oF to 104oF (10oC to 40oC)
Nonoperating	-22oF to 140oF (-30oC to 60oC)
Relative Humidity: (noncondensing)
Operating	20% to 80%
Nonoperating	5% to 90%


CONFIGURATION - HARD DRIVE

First Drive		Jumper Settings		Second Drive		Jumper Settings
20 MB 3:1	E7	E6	E5	No Drive	NA
	ON	OFF	ON
20 MB 3:1	E7	E6	E5	20 MB 3:1	E7	E6	E5
	ON	ON	OFF		OFF	ON	OFF
20 MB 3:1	E7	E6	E5	20 MB (1:1), 40, 84 or 110MB	ACT	C/D	DSP	HSP
	ON	ON	OFF		OFF	OFF	OFF	ON
20 (1:1), 40, 84 or 110MB	ACT	C/D	DSP	HSP	No Drive	NA
	ON	ON	OFF	OFF
20 (1:1), 40, 84 or 110MB	ACT	C/D	DSP	HSP	20 MB	E7	E6	E5
	OFF	ON	ON	OFF		OFF	ON	OFF
20 (1:1), 40, 84 or 110MB	ACT	C/D	DSP	HSP	20 (1:1), 84 or 110MB	ACT	C/D	DSP	HSP
	OFF	ON	ON	OFF		OFF	OFF	OFF	OFF
60, 120, or 210MB	C/D	DSP	No Drive	NA
	ON	OFF
60, 120, or 210MB	C/D	DSP	60, 120, or 210MB	C/D	DSP
	ON	ON		OFF	OFF
DSP - Drive slave preset

HSP - Host slave preset

ACT - Activate

C/D - Select default drive


CONFIGURATION - SYSTEM BOARD

386SX System Board Switch Settings

(Assy Nos. 000954, 001145, 001148, 001157, 001644)

SW1 Settings

1	2	3	4	5	6	Function
ON						Enable fail safe timer (default)
OFF						Disable fail safe timer
	ON					387SX coprocessor installed
	OFF					387SX coprocessor not installed (default)
		OFF				Reserved
			ON			CPU boot speed 16 MHz, except when accessing  diskette drive, then 8MHz
			OFF			CPU boot speed 16 MHz always (default)
				OFF		Reserved
					ON	EGA, RGBI, or VGC/VGA (default)
					OFF	Third party monochrome (MDA only)

SW2 Settings

1	2	3	4	5	6	7	8	Function
OFF								Primary diskette and Hard  drive address select (3FX and 1FX)  (default)
ON								Secondary diskette and Hard  drive address select (37X and 17X)
	OFF							Enable power on password (default)
	ON							Disable power on password
		OFF						Enable Hard drive (default)
		ON						Disable Hard drive
			OFF  OFF					Serial interface COM1 IRQ4  (default)
			ON   OFF					Serial interface COM2 IRQ3
			ON   ON					Disable serial interface
			OFF  ON					Reserved
				ON   OFF				Select printer interface LPT1 (3BX)   (default)
				OFF  ON				Select printer interface LPT2 (37X)
				ON   ON				Disable printer interface
				OFF  OFF				Reserved
					OFF			Enable integrated VGC/VGA (default)
					ON			Disable integrated VGC/VGA

SW3 Settings

1	2	3	4	5	6	Function
ON	ON					640 KB base memory limit (default)
ON	OFF					512 KB base memory limit
OFF	OFF					256 KB base memory limit
OFF	ON					Reserved
						Memory     Memory    Memory    Total
						Expansion  Module A  Module B  Memory
		ON	ON	ON	ON	1 MB *
		ON	ON	ON	OFF	1 MB                                               2 MB è
		ON	ON	OFF	ON	1 MB       1 MB                               3 MB
		ON	ON	OFF	OFF	1 MB       1 MB           1 MB            4 MB
		OFF	ON	ON	OFF	4 MB                                                5 MB
		ON	OFF	OFF	ON	1 MB       4 MB                                 6 MB
		ON	OFF	ON	ON	1 MB       1 MB           4 MB              7 MB
		OFF	ON	OFF	ON	4 MB       4 MB                                 9 MB
		ON	OFF	OFF	OFF	1 MB       4 MB           4 MB             10 MB
		OFF	ON	OFF	OFF	4 MB       4 MB           4 MB              13 MB

* On system board only.

è Default

386SX System Board Jumper Settings (Assy Nos. 000954, 001145)

Jumper	Setting	Function
E4	1 - 2	Enable IRQ12 from bus, disable pointing device
E4	2 - 3 *	Enable pointing device interface (default)
E3	Jumper on	Reserved
E2	umper on	Reserved

* Pins closest to U64.

System Board Jumper Settings (Assy Nos. 001148, 001157, 001644)

Jumper	Setting	Function
E1	jumper on	Reserved
E3	Jumper on	Reserved
E4	2 - 3	Enable pointing device interface (default)
E4	1 - 2	Enable IRQ12 from bus, disable pointing device interface
E10	1 - 2	8 bit video BIOS (default)
E10	2 - 3	16 bit video BIOS

System Board Switch Settings (Assy No. 002116 *)

SW1 Settings

1	2	3	4	5	6	Function
ON						Enable integrated VGA (default)
OFF						Disable integrated VGA
	ON					Enable ROM resident setup (default)
	OFF					Disable ROM resident setup
		ON				Enable external boot (default)
		OFF				Disable external boot
			ON			Enable power on password (default)
			OFF			Disable power on password
				ON		Reserved
					ON	Enable diskette write (default)
					OFF	Disable diskette write

* Not available in the U.S.


 CONFIGURATION - VIDEO

386SX System Board Switch Settings

(Assy Nos. 000954, 001145, 001148, 001157, 001644)

SW1 Settings

1	2	3	4	5	6	Function
					ON	EGA, RGBI, or VGC/VGA (default)
					OFF	Third party monochrome (MDA only)

SW2 Settings

1	2	3	4	5	6	7	8	Function
					OFF			Enable integrated VGC/VGA (default)
					ON			Disable integrated VGC/VGA

System Board Jumper Settings (Assy Nos. 001148, 001157, 001644)

Jumper	Setting	Function
E10	1 - 2	8 bit video BIOS (default)
E10	2 - 3	16 bit video BIOS

System Board Switch Settings (Assy No. 002116 *)

SW1 Settings

1	2	3	4	5	6	Function
ON						Enable integrated VGA (default)
OFF						Disable integrated VGA


GENERAL - HARD DRIVE

Fixed Disk Drives	Quantity Supported	Drive Positions Supported	Controller Required
320MB	1 *	D	15 MHz ESDI
300MB	up to 4	Fixed Disk external expansion unit	15 MHz ESDI (2 drives per controller)
210 MB	up to 2	C, D	on System Board
120MB	up to 2	C, D	on System Board
110MB	up to 2	C, D	on System Board
84MB	up to 2	C, D	on System Board
60MB	up to 2	C, D	on System Board
40MB	up to 2	C, D	on System Board
20MB	up to 2	C, D	on System Board
Fixed Disk Expansion Unit Model 300	up to 2	External	15 MHz ESDI


GENERAL - ROMS

System ROM Locations

System Board Assy No.	System ROM	System Option ROM
000954	U81 ODD	U67 EVEN
001145	U81 ODD	U67 EVEN
001148	U90 ODD	U47 ODD
	U74 EVEN	U40 EVEN
001157	U90 ODD	U47 ODD
	U74 EVEN	U40 EVEN
001644	U90 ODD	U47 ODD
	U74 EVEN	U40 EVEN
002116	U100


GENERAL - TAPE DRIVES

150/250 Megabyte Tape Drive

Tape Adapter Required*

80/120 Megabyte Tape

Drive with Compression

Controller imbedded on System Board

60 Megabyte Tape

Drive with Compression

Controller imbedded on System Board

* Included with option kit.


OPTION PART NUMBERS - TAPE DRIVE

60MB Tape Drive w/Compression	131251-001
60MB Tape Cartridge	121690-001
80/120MB Tape Drive w/Compression	131247-001
80MB Tape Cartridge	115212-001
120MB Tape Cartridge	115212-002
150/250MB Tape Drive w/Compression*	132842-001
150MB Tape Cartridge	113192-001
250MB Tape Cartridge	115212-003
*SY-TOS Plus Tape Software for MS-DOS is included in this kit.


OPTION PART NUMBERS - MEMORY

1MB, 16-bit Memory Expansion Board	113633-001
4MB, 16-bit Memory Expansion Board	113634-001
1MB Memory Module	113646-001
4MB Memory Module	112534-001


OPTION PART NUMBERS - VIDEO

114438-001	Video Graphics Monochrome Monitor (Model 411)
143650-001	COMPAQ VGA Color Monitor (Model 470)
122917-001	Video Graphics Color Monitor (Model 420)
122918-001	Reduced Emissions Video Graphics Color Monitor (Model 420sc)
143800-001	COMPAQ SVGA Color Monitor (Model 471)
143800-003	Reduced Emissions SVGA Color Monitor (Model 472)
141546-001	COMPAQ 1024 Color Monitor (Model 461)
141564-001	COMPAQ 1024 Color Monitor (Model 460)
133560-001	QVision 150 Color Monitor (Model 440)
133510-001	QVision 170 Color Monitor (Model 450)
126658-001	QVision 1024/I Controllerr


OPTION PART NUMBERS - Serial/Parallel Interface Board

Serial/Parallel Interface Board         108406-001


OPTION PART NUMBERS - Coprocessor

20MHz 387SX Coprocessor                 118300-001


CONFIGURATION - MEMORY

386SX System Board Switch Settings

(Assy Nos. 000954, 001145, 001148, 001157, 001644)

SW3 Settings

1	2	3	4	5	6	Function
ON	ON					640 KB base memory limit (default)
ON	OFF					512 KB base memory limit
OFF	OFF					256 KB base memory limit
OFF	ON					Reserved
						Memory     Memory    Memory    Total
						Expansion  Module A  Module B  Memory
		ON	ON	ON	ON	1 MB *
		ON	ON	ON	OFF	1 MB                                               2 MB è
		ON	ON	OFF	ON	1 MB       1 MB                               3 MB
		ON	ON	OFF	OFF	1 MB       1 MB           1 MB            4 MB
		OFF	ON	ON	OFF	4 MB                                                5 MB
		ON	OFF	OFF	ON	1 MB       4 MB                                 6 MB
		ON	OFF	ON	ON	1 MB       1 MB           4 MB              7 MB
		OFF	ON	OFF	ON	4 MB       4 MB                                 9 MB
		ON	OFF	OFF	OFF	1 MB       4 MB           4 MB             10 MB
		OFF	ON	OFF	OFF	4 MB       4 MB           4 MB              13 MB

* On system board only.

è Default


SPARE PART NUMBERS - CABLES

Description	Part #
Drive Power Cable	129227-001
Fixed Disk Drive Signal Cable (single)	129226-001
Diskette Drive Signal/Power Cable (single or dual) 3.5 diskette drive	129228-001
Fixed Disk Drive Signal Cable (dual)	129352-001
Diskette/Tape Drive Signal Cable (single or dual) 5.25 diskette drive	129229-001


SPARE PART NUMBERS - TAPE DRIVES

Description	Part #
1.3/2.0 Gigabyte Digital Audio Tape Drive	131149-001
320/525 Megabyte Tape Drive	116804-001
80/120 Megabyte Tape Drv w\ Compr.	122087-001
60  Megabyte Tape Drive	112524-001
525 Megabyte Tape Cartridge	116604-001
60 Megabyte Tape Cartridge	121683-001
120 Megabyte Tape Drive	115233-001 *
1.3 Gigabyte Tape Cartridge	122027-001


PROCESSOR UPGRADES

There is no processor upgrade available for this unit.