SOFTPAQ NUMBER:  SP6263
PART NUMBER:  275881-002, 275882-002
TITLE:  Compaq Array Configuration Utility
VERSION:  1.20 Rev B
LANGUAGE:  English, French, Italian, German, Spanish, Japanese

CATEGORY:  Systems/Diagnostics-Setup

PRODUCTS AFFECTED:  Systempro/XL, ProSignia and ProLiant Servers 
with EISA or PCI Smart-2, SMART-2SL, SMART-2DH, or Fibre Array Controllers

OPERATING SYSTEM:  Microsoft Windows NT; Windows 3.1

SYSTEM CONFIGURATION:  Using EISA or PCI Smart-2, SMART-2SL, 
SMART-2DH, or Fibre Array Controllers

EFFECTIVE DATE:  20 May 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP6262

DESCRIPTION:  Creates the 2-diskette set for the Compaq Array 
Configuration Utility, which is for Compaq SMART-2, SMART-2SL,
SMART-2DH, and Fibre Array Controllers. The Array Configuration utility
is installed on the System Partition for those systems which support
it and have hard drives. It is shipped as diskette(s) on all other products.

HOW TO USE:

1. Obtain two (2) formatted 1.44-MB diskettes.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file, 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskettes in a drive to create the diskettes.

4. After the diskettes have been created, you may delete the  
SoftPaq file downloaded in step 2.

HOW TO UPGRADE THE SYSTEM PARTITION:

If the Array Configuration Utility (ACU) is installed on the 
System Partition, boot to the System Partition and navigate 
through the menus and select the Upgrade System Partition choice. 
Place an X next to the Array Configuration Utility and press 
ENTER. You will be prompted to insert both diskettes and after the 
files have been copied you can run the ACU from the System 
Partition.

NOTE: This requires a 32MB System Partition which can only be 
created on a hard disk with 32MB of unused space at the beginning 
of the drive.  Use the Compaq System Configuration Utility Version 
2.30 or later to create a 32MB System Partition.  Search for the 
latest version of the Compaq System Configuration Utility as a 
downloadable Diagnostics/Setup Softpaq.

HOW TO UPGRADE THE WINDOWS NT VERSION:

If the Array Configuration Utility is installed online on a 
Windows NT server, follow the directions in the Windows NT Support 
Software Diskette's README.TXT file to perform the upgrade. 
Search for the latest version of the Windows NT Support Software 
Diskette as a downloadable Softpaq from Compaq.

HOW TO RUN THE OFFLINE VERSION:

If the ACU is not installed on the System Partition or on an NT 
server, power down your computer, place the Compaq System 
Configuration Utility diskette number 1 in Drive A:, and power up 
your computer.

Copyright 1995-1998 Compaq Computer Corporation.  All rights 
reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies