SOFTPAQ NUMBER: SP4752 PART NUMBER: 212455-002 FILE NAME: N/A TITLE: Compaq Drive Array 2 for Windows NT 3.51 VERSION: 1.10 LANGUAGE: English CATEGORY: Drivers DIVISIONS: Systems PRODUCTS AFFECTED: ProLiant 800, ProLiant 1600, ProLiant 1850R, ProLiant 3000, ProLiant 5500, ProLiant 6000, ProLiant 6400R, ProLiant 6500, ProLiant 7000, ProLiant 8000, ProLiant 8500, ProLiant ML350, ProLiant ML370, ProLiant DL380, ProLiant ML530, Prosignia 720, Prosignia 740. OPERATING SYSTEM: Microsoft Windows NT Version 3.51 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: 18 August 2000 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.0 SUPERSEDES: N/A DESCRIPTION: This SoftPaq creates the "Compaq Drive Array 2 Controller Support for Microsoft Windows NT 3.51" diskette. The Driver supports the following controllers: Compaq Smart Array Controllers: Integrated Smart Array Controller Smart Array 431 Smart Array 4200 The following diskette can be created using the files that result when the SoftPaq is unbundled: Diskette 1 - Compaq(R) Drive Array 2 Controller Support for Microsoft(R) Windows NT 3.51 HOW TO USE: 1. Download the SoftPaq SP4752.EXE to a directory on your hard drive. 2. Execute the downloaded SoftPaq file: SP4752 [ENTER] and follow the on-screen instructions. The following files will be created: QRST5.EXE 212455US._01 SP4752.TXT 4. After the disks are created, you may delete the downloaded file SP4752.EXE and the other files created in that directory. HOW TO CREATE THE SUPPORT SOFTWARE DISKETTE: To create the Compaq Drive Array 2 Driver v1.10 diskette, make sure the files QRST5.EXE and 212455US._01 are placed in an empty directory. From the command prompt, start QRST5 (no parameters are needed) and follow the on screen instructions. You need one pre-formatted, blank 1.44MB diskette. Copyright (C) 2000, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.