SOFTPAQ NUMBER:  SP4794
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Presario 1600 ROMPaq Update
VERSION:   RW_0910.97
LANGUAGE:  English

CATEGORY:  Consumer/Software Solutions

PRODUCTS AFFECTED:  Compaq Presario 1600 Series

OPERATING SYSTEM:  Microsoft Windows 95

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  23 Sept 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP4418 

DESCRIPTION:  Creates a bootable diskette to upgrade the System ROM on 
Presario 1600 Series notebooks to version RW_0910.97.  
This version adds the capability to configure a modem that is at
address 260h or 130h.  This feature supports manufacturing and is
typically not important to the end user. 

This version includes an update from the previous ROM version that fixes a 
problem that caused some PC (Cardbus/PCMCIA) Cards to lock the system 
when used in the bottom slot.

This version also incorporates the following changes from an earlier ROM 
version:

Warm Boot Lock Ups

  A problem was indentified that caused the unit to sometimes
  lock up while attempting a warm boot.  This problem occurred
  most of the time when exiting F10 setup.  The user would hear 
  a series of beeps in a 1-3-3-1 pattern, the screen would blank, 
  and the system would lock up. This problem is fixed.

Hibernate Resume Problems

  Fixes problem where the system would sometimes lock up if keys were 
  pressed while resuming from hibernation.

  Fixes problem where the system would lock up when resuming from 
  hibernation if the previous boot was incomplete.

  Fixes slight video corruption in Hibernate screen.

F10 Setup Power Mangement Settings:

  In previous ROM versions, the IDLE option was incorrectly
  defaulted to ON if the user chose "Maximum Performance" in
  the Power setup, while IDLE was turned OFF when "Maximum
  Power Savings" was chosen.  The descibed settings were oposite
  of what they should be. This ROM version corrects this problem.

Neomagic Video BIOS 1.03 Upgrade

  In previous ROM versions, the TV option was incorrectly presented 
  to the user as a choice under Display Properties/Neomagic/Display Options. 
  "TV Out" is not supported on these models, and the TV radio button is now 
  unselectable.

Supports 20X CD ROM drives

HOW TO USE:

1.  Obtain a formatted 1.44-MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change
    to that directory.  The file that is downloaded is an executable with
    a filename based on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file
    and follow the on-screen instructions.  You will be prompted to
    insert the formatted diskette in a drive to create the diskette.

4.  After the diskette has been created, you may delete the
    SoftPaq file downloaded in step 2.

5.  Turn off the computer and insert the created diskette.

6.  Turn the computer ON.

7.  The computer boots from the diskette and a batch file applies the update.
    Follow the on-screen prompts.  When the update is complete, the notebook 
    will beep and display a message.

8.  After the update has finished, remove the diskette and turn the unit OFF
    again.  The updated ROM will be in effect the next time the 
    computer is started.

  Copyright 1997, Compaq Computer Corporation.  All rights reserved.
  
  Product names mentioned herein may be trademarks and/or registered
  trademarks of their respective companies