SOFTPAQ NUMBER: SP4644 PART NUMBER: N/A FILE NAME: N/A TITLE: Allow Presario Sleep Mode on a Network VERSION: 1.00.A1 LANGUAGE: English CATEGORY: Consumer/Software Solutions PRODUCTS AFFECTED: Compaq Presario desktops and minitowers OPERATING SYSTEM: Microsoft Windows 95 SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 05 September 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.x SUPERSEDES: N/A DESCRIPTION: Unpacks the files needed to install a Power Managment Utility that allows Presario desktops and minitowers to maintain a network connection even when the system enters Sleep mode. Without this utility, the connection is likely to be lost. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into the current directory. To extract the files into a different directory, specify the complete path of the directory as a parameter: SPxxxx NOTE: could indicate a diskette drive Enter "Y" to confirm and files are unpacked into the download directory or the directory specified. 3. After the directory has been created, you may delete the self-extracting file downloaded in step 1. 4. If you are not already running Windows 95 (e.g. if you are in DOS mode), restart the computer and let Windows 95 start. 5. From the Windows 95 menu, select Start, Run, and enter: \setup where is the dirctory where the Power Managment Utility installation files are located. 6. The Install shield guides you through the installation procedure. When prompted to restart the computer, choose Yes. 7. After the installation is completed, you may delete the downloaded files unpacked in step 2 if you wish. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies