SOFTPAQ NUMBER: SP4630 PART NUMBER: N/A FILE NAME: N/A TITLE: Deskpro/ProLinea Windows NT 4.0 Universal Video Driver Manager VERSION: 1.11.00 Rev A LANGUAGE: Finnish CATEGORY: Desktops/Drivers PRODUCTS AFFECTED: Deskpro 2000 models: 5100, 5120, 5133, 5166, 5166MMX, 5200, 5200MMX, 5233MMX, 6180, 6200, 6233MMX, 6266MMX, 6300MMX Deskpro 4000 models: 5100, 5120, 5133, 5166, 5166MMX, 5200, 5200MMX, 5233MMX, 6180, 6200, 6233MMX, 6233X, 6266MMX, 6300MMX Deskpro 4000N models: 5166MMX, 5200MMX, 5233MMX Deskpro 4000S models: 5166MMX, 5200MMX, 5233MMX Deskpro 6000 models: 5166, 5200, 6180, 6200, 6233MMX, 6233X, 6266MMX, 6266X, 6300MMX Deskpro 4100, 450, 466, 575, 590 Deskpro 5100, 5120, 5133, 5150, 5166 Deskpro XL 450, 466, 5100, 5120, 5133, 560, 566, 575, 590, 6150, 6200 ProLinea 4100, 450, 466, 5100, 5100e, 5120, 5120e, 5133, 5150, 5166 ProLinea 575, 575e, 590 OPERATING SYSTEM: Microsoft Windows NT 4.0 SYSTEM CONFIGURATION: This Universal Video Driver Manager supports any of the following graphics controllers: Matrox Millennium Matrox Millennium II S3 ViRGE S3 V2 Cirrus Logic 5434 Cirrus Logic 5436 Cirrus Logic 5446 Compaq QVision 1280P/1280P+ EFFECTIVE DATE: 17 September 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: SP3880 DESCRIPTION: Unpacks the files needed to install a Windows 95 application program that detects the type of graphics controller in Deskpro and ProLinea computers and installs the appropriate Windows 95 video driver that supports it. Optionally, a set of 2 installation diskettes can be created. New features for this version include: - Added support for Matrox Millennium II and Performance Graphics Controllers Video drivers included in this SoftPaq: Matrox Millennium, Millennium II, Performance Ver 3.20.055 Deskpro 2000/4000 Windows NT 4.0 Graphics Drivers HOW TO USE: 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into the current directory. To extract the files into a different directory, specify the complete path of the directory as a parameter: SPxxxx Enter "Y" to confirm and files are unpacked into the download directory or the directory specified. 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. The application may be installed directly from the files on the download directory or a set of two diskettes can be created. To create a set of diskettes, run MAKEDISK.BAT. To start the application, select Start, Run. Then type the path to the download directory and the application name (SETUPUDM.EXE). Example: c:\\setupudm Press the Enter key or click OK. To run the application from diskette, put the first diskette created by running MAKEDISK.BAT into the diskette drive. Select Start, Run and type the diskette drive path and the application name (SETUPUDM.EXE). Example: a:\setupudm Press the Enter key or click OK. 5. The Universal Driver Manager detects the current display adapter and checks to see if it is a supported graphics controller. If the currently active graphics controller in the system is not a supported controller (see above list), an error message is displayed. 6. If a supported controller is found, a message is displayed showing which one was found. Select OK to start installing the driver. Follow the on-screen instructions and reboot the system to activate the new driver. 7. After the driver has been installed, you may delete the files from the download directory if you wish. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies