TITLE: ADI AC97 Integrated Digital Audio Driver VERSION: 5.12.1.4070 Rev. F DESCRIPTION: This package contains the audio driver for the ADI AC97 Integrated Digital Audio Controller in the listed desktop models and operating systems. NOTE: For Linux support, visit the Alsa website at http://www.alsa-project.org/ for the latest supported drivers. PURPOSE: Recommended SOFTPAQ NUMBER: SP34226 SUPERSEDES: SP27989 EFFECTIVE DATE: March 27, 2006 CATEGORY: Driver - Audio SSM SUPPORTED: Yes PRODUCT TYPE(S): Desktops HARDWARE PRODUCT MODEL(S): HP Compaq dc5100 microtower: All Models HP Compaq dc5100 small form factor: All Models HP Compaq dc7100 convertible minitower: All Models HP Compaq dc7100 small form factor: All Models HP Compaq dc7100 ultra-slim desktop: All Models HP Compaq dx2100 Slim Tower PC: All Models HP Compaq dx6100 microtower: All Models HP Compaq dx6100 slim tower: All Models HP Compaq dx6120 microtower: All Models HP Compaq dx6120 slim tower: All Models HP Compaq dx6128 microtower: All Models SOFTWARE PRODUCT(S): None DEVICES SUPPORTED: (uATX)HP Compaq dx6100 MT/ST AC97 Integrated Digital Audio HP Compaq dc7100 SFF AC97 Integrated Digital Audio HP Compaq dc7100 USDT AC97 Integrated Digital Audio HP Compaq dx61xx microtower HP Compaq dx61xx Slim tower reserved OPERATING SYSTEM(S): Microsoft Windows 2000 Microsoft Windows XP Home Edition Microsoft Windows XP Professional LANGUAGE(S): Global ENHANCEMENTS: N/A FIXES: - Resolves intermittent issue where the system stops responding (hangs) when resuming from Standby mode with an active network connection. The issue was resolved by increasing suspend latency. PREREQUISITES: - DirectX 6 (or higher) should be installed prior to installation of audio drivers from this SoftPaq. - If you use System Software Manager (SSM), you must be using version 1.50 (or later). For more information about SSM and to obtain the latest version of SSM, please use the following URL: http:\\www.hp.com\go\ssm INSTALLATION INSTRUCTIONS: 1. Download the SoftPaq .EXE file to a directory on your hard drive. 2. Execute the downloaded file and follow the on-screen instructions. NOTE: After the files have been unpacked, the self-extracting file downloaded in Step 1 can be deleted, if desired. 3. To install: Execute the setup.exe file unpacked in Step 2. The default location is C:\SWSetup\SP34226, unless otherwise modified during Step 2. NOTE: After the installation is complete, the directory created in Step 2 can be deleted, if desired. Copyright (c) 2004-2006 Hewlett-Packard Development Company, L.P