SOFTPAQ NUMBER:  SP32113
PART NUMBER: N/A
FILE NAME:  SP32113.EXE
TITLE:  System ROMPaq Firmware Upgrade Diskette for HP ProLiant ML310 G3 Servers


VERSION:  2005.12.14A

LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Systems

PRODUCTS AFFECTED:  HP ProLiant ML310 G3 Servers

OPERATING SYSTEM:  All

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE Date:  1/27/06

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES:  SP31664

DESCRIPTION:   This release provides updated system ROM images
for the latest maintenance releases of HP ProLiant ML310 G3 Servers.






New Features -


        HP ProLiant ML310 G3 system ROM W02 (12/14/2005)
        =================================================

		1) Added support for the latest Intel Pentium processor.		
		


Problems Fixed -


        HP ProLiant ML310 G3 system ROM W02 (12/14/2005)
        =================================================


		1) Resolved issue with updating the System ROM using a Systems
		   ROMPAQ Diskette from a USB floppy drive when an
		   unsupported processor is detected.
	 		
		2) Resolved issue with Windows 2003 hanging during boot when 
		   Virtual Serial Port is configured to COM1 or COM2 but 
		   EMS is configured to iLO 2 PCI Virtual Serial Port.

		3) Resolved issue which resulted in a hang during POST when 
		   video cards with option ROMs 64 Kbytes or greater in size 
		   are installed.

		4) Resolved an issue where the High Precision Event Timer (HPET) 
		   support could not be used by the operating system.

	 	5) Added support for iSCSI adapters to be configured as the 
		   boot controller in the ROM-Based Setup Utility (RBSU).  
		   Certain iSCSI adapters previously would not show up in 
		   the boot controller menu in RBSU.


	   
		 


Known Problems -


        HP ProLiant ML310 G3 system ROM W02 (12/14/2005)
        =================================================

		None.               






HOW TO USE:


1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is SP32113.EXE.


3.  From that drive and directory, execute the SoftPaq file:
SP32113.exe [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.


4.  After the diskette is created, you may delete the downloaded file
SP32113.EXE if you wish.


Copyright 2006, Hewlett-Packard Company.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies