SOFTPAQ NUMBER:  SP32112
PART NUMBER: N/A
FILE NAME:  SP32112.EXE
TITLE:  System ROMPaq Firmware Upgrade Diskette for HP ProLiant DL585 Servers


VERSION:  2006.01.20A
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Systems

PRODUCTS AFFECTED:  HP ProLiant DL585 Servers

OPERATING SYSTEM:  All

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE Date:  2/1/06

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES:  SP31230

DESCRIPTION:   This release provides updated system ROM images
for the latest maintenance releases of HP ProLiant DL585 Servers.






New Features -


        HP ProLiant DL585 system ROM A01 (01/20/2006)
        =================================================

		None.
		



Problems Fixed -


        HP ProLiant DL585 system ROM A01 (01/20/2006)
        =================================================

		1) Resolved issue where a false power supply failure may be reported. In
		   rare cases, a power supply failure can be detected at run-time
		   when there is not an issue with the power supply.

		2) Resolved issue in which Windows 2003 System Properties would report 
		   incorrect Processors type information for installed Processors.

		3) Resolved an issue that may result in a server hang during POST
		   when certain storage controllers are installed and more than 7
		   logical drive volumes are configured.  This issue may occur on
		   certain controllers, whether embedded or expansion card based,
		   if 8 or more blank drives are attached to the controller.  This
		   issue will occur with, but is not limited to, the HP 8 Port
		   SAS/SATA controller, HP Single-Channel U320 SCSI HBA G2 Controller,
		   and HP 64-Bit/133 MHz PCI-X Dual-Channel U320 Controller.
		
		4) Added support for iSCSI adapters to be configured as the 
		   boot controller in the ROM-Based Setup Utility (RBSU).  
		   Certain iSCSI adapters previously would not show up in 
		   the boot controller menu in RBSU.
		               



Known Problems -


        HP ProLiant DL585 system ROM A01 (01/20/2006)
        =================================================

		None.               






HOW TO USE:


1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is sp32112.EXE.


3.  From that drive and directory, execute the SoftPaq file:
sp32112.exe [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.


4.  After the diskette is created, you may delete the downloaded file
sp32112.EXE if you wish.


Copyright 2006, Hewlett-Packard Company.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies