SOFTPAQ NUMBER:  SP32146
PART NUMBER: N/A
FILE NAME:  SP32146.EXE
TITLE:  System ROMPaq Firmware Upgrade Diskette for HP ProLiant ML310 G2 Servers


VERSION:  2006.01.20A
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Systems

PRODUCTS AFFECTED:  HP ProLiant ML310 G2 Servers

OPERATING SYSTEM:  All

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE Date:  1/30/2006

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES:  SP31824

DESCRIPTION:   This release provides updated system ROM images
for the latest maintenance releases of HP ProLiant ML310 G2 Servers.






New Features -


        HP ProLiant ML310 G2 system ROM W01 (01/20/2006)
        =================================================

		None.     
	
		    


Problems Fixed -


        HP ProLiant ML310 G2 system ROM W01 (01/20/2006)
        =================================================


		1) Resolved an issue that may result in a server hang during POST when 
		   certain storage controllers are installed and more than 7 logical 
		   drive volumes are configured.  This issue may occur on certain 
		   controllers, whether embedded or expansion card based, if 8 or 
		   more blank drives are attached to the controller.  This issue will 
		   occur with, but is not limited to, the HP 8 Port SAS/SATA controller, 
		   HP Single-Channel U320 SCSI HBA G2 Controller, and HP 64-Bit/133 
		   MHz PCI-X Dual-Channel U320 Controller.
		   
		2) Resolved an issue with support for iSCSI adapters to be 
		   configured as the boot controller in the ROM-Based Setup 
		   Utility (RBSU).  Certain iSCSI adapters previously 
		   would not show up in the boot controller menu in RBSU.
		   
		3) Resolved an issue where the System ROM could hang at the
		   end of POST when attempting to boot from a USB CDROM. 




Known Problems -


        HP ProLiant ML310 G2 system ROM W01 (01/20/2006)
        =================================================

		None.               






HOW TO USE:


1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is SP32146.EXE.


3.  From that drive and directory, execute the SoftPaq file:
SP32146.exe [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.


4.  After the diskette is created, you may delete the downloaded file
SP32146.EXE if you wish.


Copyright 2006, Hewlett-Packard Company.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies