SOFTPAQ NUMBER: SP2907 PART NUMBER: 275370-004 FILE NAME: N/A TITLE: ROMPaq for Compaq Deskpro 2000 (586c2 ROM) VERSION: 586c2_012797 LANGUAGE: English CATEGORY: ROMPaqs PRODUCTS AFFECTED: DeskPro 2000 Pentium Pro models, including 6180 and 6200 OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 27 Jan 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP2210 DESCRIPTION: This creates a ROMPaq firmware upgrade diskette to upgrade the System ROM in the above-mentioned Deskpro 2000 Pentium Pro models (586c2 ROM Family) to the 01/27/97 version. The ROM Family and ROM date can be determined by running F10 Setup. Enhancements in this version: - Adds support for: - Year 2000 - Higher Extended Memory boundary - Extended Memory Size from 16 MB to 64 MB reported in CMOS bytes 30 and 31 - IDE PDCD Drive - PCI passive release and delayed transactions - DMA for IDE devices - Microcode patch for B1 step PentiumPro processors Fixes in this version: - Fixes unexpected soft reset for Western Digital drive - Fix for Plug and Play devices that do not power up and legacy I/O ports on Plug and Play video adapters HOW TO USE: 1. Obtain a formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP2907.EXE. 3. From that drive and directory, execute the SoftPaq file: SP2907 [ENTER] You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create the diskette. 4. After the diskette is created, you may delete the downloaded file SP2907.EXE if you wish. 5. Keeping the newly created diskette in the A: drive, cycle system power to boot from the ROMPaq diskette. 6. Follow the on-screen instructions to select the 01/27/97 Compaq System ROM and flash the firmware. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies