ProLiant BL e-Class GbE Interconnect Switch Firmware for Linux =============================================================== version 2.0.1 This SoftPaq contains the ProLiant BL e-Class GbE Interconnect Switch firmware image and Readme files. software information ==================== Enhancements ============ This firmware corrects a problem in which the management interface on the switch responds to ARPs not intended for it, potentially causing problems related to pings, DHCP requests, and proxy ARPs. Installation ============ Download the SoftPaq to a directory on your target computer. The SoftPaq file that is downloaded is a .tgz file with a file name based on the SoftPaq Number. Run this command to extract the files from the .tgz file: tar -zxvf *.tgz Refer to the README file for installation instructions and firmware information. Place the firmware image file (egbe201.bin) on a TFTP server that is network-accessible from the switch you wish to update. Use the switch web page to update the firmware. Alternately, the switch's serial console may be used to update the firmware. In this case, place the image file on the server attached to the switch's serial port, and login to the serial console to perform the update. The switch will reboot upon successful completion of the firmware update. See the README.TXT file included with this SoftPaq for additional information about this firmware. systems supported ================= family models ====== ====== ProLiant BL10e All Models