TITLE: Presario 2800/Evo N800 Keyboard Controller Firmware Update

VERSION: 14.1F Rev A

DESCRIPTION:
This SoftPaq creates a diskette for upgrading the Keyboard Controller KBC Firmware (ROM) in 
Presario 2800 and Evo N800 Series notebooks.  The KBC ROM interfaces directly with the 
hardware of the computer.

NOTE: This is the same firmware upgrade that was contained in SoftPaq SP22836. The only
      difference is in the installation steps, which have been improved and made easier.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP22982
SUPERSEDES: SP22836, SP22452
EFFECTIVE DATE: October 29, 2002
CATEGORY: ROMPaq
SSM SUPPORTED: No

PRODUCT TYPE(S):
Notebooks
 
PRODUCT MODEL(S): 
Compaq Presario 2800 Series - All models
Compaq Evo N800 Series - All models

OPERATING SYSTEM(S): 
OS Independent
 
LANGUAGE(S): 
Global
 
FIXES:
 - Fixes issue where Multiport failed when resuming from Standy/hibernation based on 
   power sequence.
 
PREREQUISITES: 
N/A
 
HOW TO USE:
 
1. Download the SoftPaq to a temporary directory on your hard drive.
The file downloaded is a self-extracting executable with a filename based on the
SoftPaq Number above.

2. From that drive and directory, execute the downloaded file
and follow the on-screen instructions.


3. After the diskette has been created, you may delete the
SoftPaq file downloaded in step 2.

4. Turn off the computer.

5. Place the newly created Compaq Presario 2800/EvoN800 Series ROMPaq Diskette in Drive A:
and turn on the computer.

IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE!


Copyright (c) 2002, Hewlett-Packard Company. All Rights Reserved.
Compaq and the Compaq logo are trademarks of the Hewlett-Packard Company
in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respectiventioned
herein may be trademarks of their respective companies.