TITLE: Evo Workstations Japanese HAL Upgrade/Recovery Tool 

VERSION: 1.0 Rev D
DESCRIPTION:

This SoftPaq creates a Japanese set of files to install a utility on the Evo Workstation
models listed below for upgrading the Japanese Windows NT kernel and HAL files from 
uniprocessor to multiprocessor support.

IMPORTANT:
 - You must have the Second Processor installed before installing this software.
 - You will need to have available the Location of the current loaded Service Pack.
 - This is only intended for use on a Dual Processor Workstation running 
   Japanese Microsoft Windows NT 4.0.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP20925
SUPERSEDES: SP18209
EFFECTIVE DATE: April 18, 2002
CATEGORY: Management and System Software
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Workstations
 
PRODUCT MODEL(S): 
     Evo Workstation W6000: All Models
     Evo Workstation W8000: All Models

OPERATING SYSTEM(S): 
Japanese Microsoft Windows NT 4.0
 
LANGUAGE(S): 
Japanese
 
FIXES: 
 - Resolves issues described in Microsoft Knowledge Base article Q168132 when 
   Service Pack 6a is applied after HAL upgrade diskette is installed.
 
PREREQUISITES: 
N/A
 
HOW TO USE:
 
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename based on
the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions.

3. Refer to the README.TXT file for installation instructions and requirements.
 
 
Copyright (c) 2002 Compaq Information Technologies Group, L.P.
Compaq and the Compaq logo are trademarks of Compaq Information Technologies
Group, L.P. in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective
companies.