SOFTPAQ NUMBER: SP17762 PART NUMBER: N/A FILE NAME: SP17762.EXE TITLE: Single Point Solution Systems ROMPaq Firmware Upgrade Diskette for Compaq ProLiant ML350 Servers VERSION: 05/21/2001 LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: Systems PRODUCTS AFFECTED: Compaq ProLiant ML350 OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: June 1, 2001 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: N/A DESCRIPTION: This release provides a Single Point Solution User ROMPaq diskette for the Compaq ProLiant ML350 Servers. New Features - D04 ProLiant ML350 system ROM (05/21/2001) ========================================================= Added support for "Compaq Smart Array 532 Controller". Added support for latest Intel Pentium III Processors. Problems Fixed - D04 ProLiant ML350 system ROM (05/21/2001) ========================================================= Fixed an issue with disabling COM ports in RBSU where the IRQ was not being released to other PCI devices. Updated translations for the ROM Based Setup Utility. Corrected an issue which prevented the system from booting past the F1 prompt if no keyboard/floppy were present. Updated ACPI support to work with Beta Version of Microsoft Whistler. Known Problems - None. HOW TO USE: 1. Obtain a formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP17762.EXE. 3. From that drive and directory, execute the SoftPaq file: SP17762.EXE [ENTER] You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create diskette. 4. After the diskette is created, you may delete the downloaded file SP17762.EXE if you wish. 5. Refer to README.TXT on the diskette for instructions on installing and using the software. Copyright 2001, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies