SOFTPAQ NUMBER: SP13108 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq DRTape FW upgrade for the AIT 50 GB Tape Drive VERSION: 1.0 LANGUAGE: English CATEGORY: Storage DIVISIONS: Storage Product Division PRODUCTS AFFECTED: ProLiant 1600, ProLiant 1850R, ProLiant 3000, ProLiant 5500, ProLiant 6000, ProLiant 6400R, ProLiant 6500, ProLiant 7000, ProLiant 8000, ProLiant 8500, DL 360, DL 380, DL 580, ML 370, ML 530 OPERATING SYSTEM: NT 4.0 SYSTEM CONFIGURATION: Intel platforms PREREQUISITES: N/A EFFECTIVE DATE: April 24, 2000 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.0 SUPERSEDES: N/A DESCRIPTION: Contains the files required to install the Tape Storage Management Console (TSMC), which can be used to upgrade your tape drive to the DRTape Ready functionality. The Disaster Recovery functionality can be employed by use of the Veritas Backup Exec application for NT 4.0, Veritas part number SBE-NTSR-0000CQ plus the Intelligent Disaster Recovery option SBE-NTDR-008CQ. A live trial of this can be downloaded from http://www.veritas.com/us/trialsoftware.shtml. NOTE: The DRTape feature is supported only on the following systems with the corresponding listed BIOS Code Levels, and the date of the BIOS code must be the same date or newer than the date listed: Server Type BIOS Code Level Date PL 5500 (Xeon) P12 12/10/1999 PL 6000 (Xeon) P40/P43 12/27/1999 PL 6500 (Xeon) P11 12/10/1999 PL 7000 (Xeon) P40/P43 12/27/1999 PL 8000 P41 12/27/1999 PL 8500 P42 12/27/1999 PL 5500 P20 03/15/2000 ML 570 P20 03/15/2000 DL 380 P17 12/10/1999 PL 1600 (Pentium II) P08 12/10/1999 PL 1850R P07 12/10/1999 PL 3000 P09 12/10/1999 PL 6400R P11 12/10/1999 ML 370 P17 12/10/1999 ML 530 P19 12/22/1999 PL 3000 P19 12/22/1999 DL 580 P20 03/15/2000 PL 6400R P20 03/15/2000 DL 360 P21 12/23/1999 Enhancements/Fixes: Initial release HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. If C:\Softpaq does not exist, create it now. 2. Execute the downloaded file and follow the on-screen instructions. Enter "Y" to confirm the unpacking of files into the download directory. 3. After the files have been unpacked, you may delete the self-extracting file downloaded in step 1. 4. For installation instructions, refer to README.TXT in the created directory. 5. After the installation is completed, you may delete the files unpacked in step 2. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies