SOFTPAQ NUMBER: SP11499 PART NUMBER: N/A FILE NAME: 686W6.CAB TITLE: Professional Workstation SP700 ROM Image for Remote ROM Flash VERSION: 686W6_070999 Rev A LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: Workstations PRODUCTS AFFECTED: Compaq Professional Workstation SP700 OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: August 9, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.x PREREQUISITE: Remote Management Setup or System Software Manager (SSM) SUPERSEDES: SP10843 DESCRIPTION: Creates a cabinet file that contains a binary image for the 07/09/99 System ROM in the Professional Workstation SP700. The CAB file is used by Remote Management Setup or System Software Manager (SSM) to flash the System ROM on target Workstations on a network. Enhancements/Fixes: - Corrected a condition that was causing occasional lockups with certain graphics drivers. - Corrected a condition with plug-in cards that have option ROM's when more than 2 gigabytes of memory is present in the system. - Modified the SCSI Controller order to function properly when add-in cards that have bridges are plugged into certain PCI slots. - Modified the performance tuning algorithm that deals with AGP video cards. - Adds support for System Software Manager (SSM) HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable. 2. Execute the downloaded file and follow the on-screen instructions. The name of the extracted file is 686W6.CAB. 3. After the CAB file has been created, you may delete the self-extracting file downloaded in step 1. 4. Refer to the Remote Management Setup documentation or System Software Manager documentation for instructions on creating a Remote ROM Flash job to flash the ROM on target Workstations on the network. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.