BIOS release 1.9 for IS7/IS7-E/IS7-G  V1.0


Release information:

[ENGLISH]

1. Fixed the error message "CPU is unworkabled" for P4 Prescott 2.4G
   (533MHz/ 1M L2/ 90nm) CPU. Please follow below steps to update BIOS.
   A. Press <F1> key to continue booting when error message "CPU is
      unworkabled" show on screen.
   B. Boot up the system from bootable floppy disk and then update BIOS.
2. BIOS compile date: 03/12/2004.



[中文]

1. 修正當使用P4 Prescott 2.4G (533MHz/ 1M L2/ 90nm) CPU 會出現 "CPU is
   unworkabled" 的錯誤訊息。請依照下例步驟更新BIOS。
   A. 當螢幕出現 "CPU is unworkabled" 訊息時按下 <F1> 繼續進行開機程序。
   B. 自磁片開機並且進行更新BIOS動作。
2. BIOS 日期 : 03/12/2004。



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "is7g19.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================